緑色のおもちゃの材料

Features	Applications
High Transparence	Injection Molding Toy
Little of smell	Blowing Molding Toy
Little of Phthalate, Conforming to MATTEL Standard and FDA	NO.P Toy
Low Migration, Easy Spray Coating

ASTM Properties

Properties		ASTM	Test Cond.	Unit	Specification
					T-0000K-SA		F-K-SA	T-NOPK-SA
Mechanical
Tensile Srength	D638		50mm/min	MPa	9-15		9-15	9-15
Tensile Modulus	D638		50mm/min	Mpa	----		----	----
Elongation at Break	D638		50mm/min	％	150-250		150-250	150-250
Flexural stress	D790		5.5mm/min	Mpa	---		---	---
Flexural Modulus	D790		5.5mm/min	Mpa
Thermal
Heat Deformation Temp.	D648		1.82MPa	℃	---		---	---
Others
Specific Gravity		D792	23℃	---	1.22		1.32	1.22
Uv resistance
Characteristics					High transparent	Excellent processing			Little of smell

Note: All data in the table to be mean value in terms of testing,only for your reference,not to be sole standard..

Typical Processing Condition

Processing parameter		Typical Value	Range
Melt Temperature		160℃	150℃-17
Barrel Zone Temperature	Rear	150℃	145℃-155℃
	Middle	160℃	155℃-160℃
	Front	170℃	160℃-170℃
Mold Temperature		170℃	165℃-175℃
Processing Max Temperature		---
Injection Rate		adjust&control
Back Pressure		---

New: